When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Porsche 722.6 / Porsche A9731 Tiptronic Transfer Case/Tail Housing Gasket Set- 911, 996, 997 (rear cover)
Porsche 722.6 Transfer Case/Tail Housing Gasket Set. As of now, these gaskets are unavailable from the o.e.m. or aftermarket but we have them!
These are made to the correct thickness to maintain proper bearing preload. Set of two to service one vehicle. * Porsche A9731 / G9731
* Tech Note: Gaskets of the correct thickness are required to properly perform this repair, use of sealant only will result in improper bearing preload and may cause rapid and severe damage to the gearbox and to components not available from the O.E.M. or the aftermarket.
Fits all Porsche with 722.6 Tipronic Automatic, 2wd and awd, 911, 996, 997
Services the following Porsche designations, as well as others not yet listed:
7222702400, 7222702301X, 7222702400X, 7222501202, A9731, G9731
Additional Installation Information:
This gasket set fits ALL Porsche with 722.6 Auto- both All and 2 wheel drive.
Torque specifications are not published to our knowledge- this is our recommendation:
•Transfer Case Bolts (Torx T-45) 22 ft.-lbs. (blue loctite is recommended)
•Through Bolt (8mm Allen Head) 38 ft-lbs (blue or red loctite recommended)
•Output Flange Nut (30mm 12 point) 95 m-120 ft-lbs (red loctite recommended)
Complete installation video now available on YouTube!
Search: Porsche 722.6 Tiptronic Transfer Case Gasket Installation
