When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
VINTAGE PREWAR STYLE BICYCLE LICENSE PLATE FENDER MOUNT BRACKETTHIS LISTING IS FOR ONE BRACKET, if you want them in a quantity of 1 or 3 please see other listings in my store.If you collect, build and ride classic bicycles from the 1930's-1970's, then these these bicycle license plate brackets are for you.While there are many options for mounting a bike license plate on your favorite rider, my preference is to mount them on the rear fender near the reflector. I do like all of the creative locations to mount them; under the seat, out front on the truss rods or motorcycle-style off the rear axle but when I went to look for a bracket that mounts on the rear fender I didn't find many options on the market, so I went and made a few for myself, and ended up making a small run.These are laser-cut from stout 16ga (.065") galvanized steel, sized to accommodate the most common prewar and postwar format sized plates of roughly 2" tall x 2 5/8" wide. These brackets can be painted, plated, powder-coated or left as-is. The cut edge could rust as it is bare steel, but the galvanized finish on both sides should provide years of protection from the elements.Designed to mount using the rear reflector stud or a drop-stand clip bolt, and will accommodate a reflector up to 2" in diameter or a small taillight assembly. Mount the plate to the bracket using your preferred method.These brackets in any quantity ship FREE in the United States; to include Alaska, Hawaii and Puerto Rico, if you are located internationally, please contact me and I will get you a shipping quote. a.imagelink {color:#0000FF;} a:hover.imagelink {color:#0000FF;} a:visited.imagelink {color:#800080;} a.imagelink img.saleimage { border: 2px solid #0000FF; } a:visited.imagelink img.saleimage { border: 2px solid #800080; } VINTAGE PREWAR STYLE BICYCLE LICENSE PLATE FENDER MOUNT BRACKET
THIS LISTING IS FOR ONE BRACKET, if you want them in a quantities of 3 or 5 at discounted prices please see other listings in my store.
If you collect, build and ride classic bicycles from the 1930's-1970's, then these these bicycle license plate brackets are for you.
While there are many options for mounting a bike license plate on your favorite rider, my preference is to mount them on the rear fender near the reflector.
I do like all of the creative locations to mount them; under the seat, out front on the truss rods or motorcycle-style off the rear axle but when I went to look for a bracket that mounts on the rear fender I didn't find many options on the market, so I went and made a few for myself, and ended up making a small run.
These are laser-cut from stout 16ga (.065") galvanized steel, sized to accommodate the most common prewar and postwar format sized plates of roughly 2" tall x 2 5/8" wide. These brackets can be painted, plated, powder-coated or left as-is. The cut edge could rust as it is bare steel, but the galvanized finish on both sides should provide years of protection from the elements.
Designed to mount using the rear reflector stud or a drop-stand clip bolt, and will accommodate a reflector up to 2" in diameter or a small taillight assembly. Mount the plate to the bracket using your preferred method.
These brackets in any quantity ship FREE in the United States; to include Alaska, Hawaii and Puerto Rico, if you are located internationally, please contact me and I will get you a shipping quote.
Images sell!
Get Supersized Images & Free Image Hosting
Attention Sellers - Get Templates
Image Hosting, Scheduling at Auctiva.
Track Page Views With
Auctiva's Counter
