When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The REV9 Super Intake Chamber isn\'t just a part; it’s a performance reservoir. By housing a dedicated volume of air right where your engine needs it most, it kills the \"vacuum lag\" that plagues stock intake systems. The moment you touch the pedal, your engine breathes deep and reacts—no hesitation, just pure acceleration.
Feel the pull. By utilizing cutting-edge Superinduction technology, this chamber optimizes the pressure waves inside your intake tract. The result? A massive surge in low-gear torque that lets you power out of corners and merge with absolute confidence. It’s the \"seat-of-the-pants\" difference you can feel every time you drive.
NOT CARB LEGAL - WILL NOT BE SHIPPED INTO CA / CARB STATES.
Application: 1990-1993 Mazda Miata
Key Features:
Superinduction Technology: Specifically engineered to store a \"reserve\" of air, eliminating the vacuum-induced time lag that occurs when the throttle plate snaps open.
Velocity Stacks / Internal Funnels: Features an aerodynamically designed internal funnel (curled funnel) that stabilizes air speed and creates a laminar flow, maximizing efficiency at high RPM.
Torque-Centric Design: Developed to specifically increase \"seat-of-the-pants\" torque in the low-to-mid RPM range, where street-driven cars need it most.
Acoustic Tuning: Enhances the engine\'s natural induction sound, providing a deeper, more aggressive tone under heavy acceleration.
Direct Bolt-On Fitment: Designed as a vehicle-specific replacement for the factory suction hose or intake pipe; requires no permanent modifications to the engine bay.
Don\'t let air resistance hold you back. Upgrade to the REV9 Super Intake Chamber and feel what your car is truly capable of.
Quality Assured - Full Year Limited Warranty From Date of Purchase
*Additional Setting Adjustment Required To Achieve Desired Ride Quality. Designed To Lower Vehicles, Not Meant To Replace Factory Ride Height Levels: 32 Levels of dampening
Height Adjustment: Yes
Front Spring Rate: 8 kg/mm
Rear Spring Rate: 10 kg/mm
Front Spring Length: 260 mm
Rear Spring Length: 215 mm
Front Camber Plate: Yes + Pillowball
Rear Camber Plate: No
Front Spring Inner Diameter: 62 mm (2.44 inch)
Rear Spring Inner Diameter: 62 mm (2.44 inch)
Warranty Note: 1 Year limited warranty from date of purchases, proof requires. Warranty are not transferable.
