When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Heavy-Wall Tubing: Built from full .120\" wall, 1\" diameter steel tubing for strength and long-term durability in street rod and custom suspension setups, Precision Welded Design: Fixture-welded construction ensures consistent geometry and proper alignment for reliable suspension performance, Serviceable Ball Joint: Features screw-in style ball joints for easy replacement and long-term serviceability, Quiet Operation: Equipped with no-squeak bushings to reduce noise and improve ride quality compared to factory stamped arms, Direct Replacement Fitment: Designed as a stock-width replacement for 1974-80 Pinto, Bobcat, and 1974-78 Mustang II applications; sold individually Speedway Mustang II Tubular Upper Control Arm, Stock Width Sku # 91034320 Mfr. Part # 91034320 Condition New Brand Speedway Motors Sold Each Details
You don\'t have to look any farther for tubular control arms for your hot rod. Full .120 wall, 1\" diameter tubing, fixture welded and features screw-in ball joints and no-squeak bushings. Will work with nearly any stock or aftermarket crossmember.
Replaces 1974-80 Pinto, Bobcat and 1974-78 Mustang II control arms.
- Full .120\" wall
- 1\" diameter tubing
- Fixture welded
- Screw-in ball joints
- No-squeak bushings
- Works with all Mustang II crossmembers we sell
Note: This item is sold individually.
Check out our 5/8\" narrower than stock width upper control arms () for applications that require a shorter track width. These allow you to tuck the wheels up under the fenders without having to buy expensive special offset wheels.
Why go with tubular control arms? The most obvious reason is the looks. Tubular control arms and strut rods give your hot rod a much cleaner and hi-tech appearance than the stock type do. Another bonus is that the tubular control arms are available in 5/8 \" narrower than stock, which helps tuck the wheels up under the fenders without having to buy expensive special offset wheel. When using 5/8 \" narrower control arms, 1 \" must be removed from each inner tie rod end.Why go with tubular control arms? The most obvious reason is the looks. Tubular control arms and strut rods give your hot rod a much cleaner and hi-tech appearance than the stock type do. Another bonus is that the tubular control arms are available in 5/8 \" narrower than stock, which helps tuck the wheels up under the fenders without having to buy expensive special offset wheel. When using 5/8 \" narrower control arms, 1 \" must be removed from each inner tie rod end. Specs Material Type Steel Control Arm Style Tubular Position Front Upper Ball Joint Included Yes Ball Joint Type Screw-in Bushing Material Rubber Control Arm Material Steel Hardware Included Yes Adjustable No Finish Natural Sold in Quantity Each Tube O.D. 0.87" Degree of Taper 7 degree Shaft Diameter 0.75" MFG. Part # 91034320 Centerline of Holes 5" Reviews Fit perfect! Exactly what I needed. Rated by Greasy Reece on February 08, 2026
Summary: I needed new upper control arms for my latest project. I always watch the "bargain bin" and there they were! Super good discount, saved me a couple hundred bucks. Fit perfect!
Yes, I recommend this product.
Great Product Rated by Big Dave on April 18, 2022
Summary: Great product from the people you trust. Always helpful staff,Everything they sell is the highest quality.I go here first
Yes, I recommend this product.
Good product for the price. Rated by P. Kersey on March 31, 2022
Summary: Replaced the factory upper control arms on a project car of mine. I think they look better than the stamped factory control arms.
Yes, I recommend this product.
Great bargain Rated by Alex on November 13, 2020
Summary: Fit my aftermarket mustang II front end kit perfectly. Nice welds too
Yes, I recommend this product.
Great Product, would buy again. Rated by WyFarmall on April 27, 2020
Summary: Used these arms to complete my Mustang ll IFS. These things look great, are well built and professionally welded.
Yes, I recommend this product.
Related Items / Suggested Parts Lubrication Engineers 3752 LE Almagard Industrial Grease, 14.5 Oz Permatex® Anti-Seize Lubricant, 1 Fl. Oz Spanner Wrench for 1968-89 Chrysler Joint 910-34323 Speedway Mustang II Upper Control Arm T-Bolts Speedway Mustang II Coil Spring Ride Height Adjuster Kit Speedway Mustang II Stock-Height Steel Spindles Speedway Mustang II Offset Tubular Control Arms, Stock Spring No Strut Speedway Mustang II Tubular Lower A-Arms for Coilovers, No Strut Rod Replacement Bushings for Mustang II Upper Control Arms Speedway 1968-89 Chrysler-Type Upper K772 Style Ball Joint Speedway Mustang II Tubular Upper Control Arms, Stock Width, Pair Mustang II Tubular Control Arms | Upper, Stock Width, Black Tech Support We\'re here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 74 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
