Swift CF 3in Frame Kit (Including Hardware) For Sale

Build your own Swift CF 3-inch lithium-ion quadcopter. The kit includes the carbon fiber frame, 18650 and 21700 battery holders, canopy, mounts, copper battery contacts, power leads, and mounting hardware. Electronics are not included, giving you the freedom to choose your own components.

The Swift CF is still early in its development, and while the finished quad has already been performing great, there is always room to improve. Community response is a big part of that process. Share what works, what doesn't, and what you'd like to see changed. I'll listen, test the ideas, and implement improvements that make the Swift CF better for everyone.

Every kit includes both 18650 and 21700 battery holders. Use an 18650 for a lighter, more responsive build or a 21700 for maximum endurance, with flight times exceeding 30 minutes in ideal conditions.

Pure copper contacts minimize electrical resistance, helping reduce voltage sag and maximize power delivery from high-discharge lithium-ion cells.

The durable deadcat frame keeps the propellers out of the camera view while providing the strength needed for everyday flying and crashes.

A standard 25.5 × 25.5 mm mounting pattern supports most modern AIO flight controllers, with support for both analog and digital builds.

• 1 × Swift CF 3" Carbon Fiber Frame
• 1 × 18650 Battery Holder
• 1 × 21700 Battery Holder
• 1 × TPU Canopy with GPS Mount
• 1 × TPU T-Antenna Mount
• 2 × TPU Camera Spacer Mounts
• 150 × 10 × 0.2 mm Pure Copper Strip
• 2 × 80 mm 18 AWG Power Leads

• 12 × M2 × 4 mm Steel Screws
• 8 × M2 × 6 mm Steel Screws
• 8 × M2 × 8 mm Steel Screws
• 4 × M2 × 15 mm Nylon Screws
• 4 × M2 Nylon Nuts
• 8 × M2 Nylon Spacers
• 4 × M2 × 12 mm Aluminum Standoffs

Electronics, motors, propellers, battery, camera, and other components required to complete the aircraft are not included.

For recommended components, build guides, CAD files, and additional information, visit LithiumIonFPV.com.