When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
UPOL UP0745 GOLD Lightweight Body Filler - 1 Gallon (3 Liter) Can – Premium Professional Grade
Brand new, sealed UPOL Liteweight GOLD premium lightweight body filler in the large 3 Liter (approx. 1 Gallon) tin – the top choice of professional body shops worldwide!
This high-performance, gold-colored polyester filler (formerly known as Flyweight Gold) is engineered for superior results on auto body repairs. It features a smooth, creamy formula that spreads effortlessly, sands like butter, and delivers professional-grade finishes every time.
Key Features & Benefits:
- Ultra-smooth & creamy– Applies easily with minimal effort and spreads beautifully, even on vertical surfaces thanks to itsnon-saggingformula.
- Lightweight premium grade– Excellent filling properties for medium-depth panel damage, holes, and imperfections.
- Virtually pinhole-free&non-porous– No shrinkage, no pull-back, and a tack-free surface for flawless results.
- Bi-Cure adhesion system– Outstandingdirect-to-metal (DTM)adhesion, plus bonds well to galvanized steel, aluminum, OEM paints, fiberglass, SMC, lightly abraded E-coat, and most plastics.
- Fast curing– Becomes solvent-resistant (impervious) in just15-20 minutesat room temperature. Ready to sand, prime, and paint super quick!
- Easy to sand– Professionals rave about how smoothly it sands with minimal clogging, saving time and effort.
Users call it \"the best filler I\'ve ever used\" – smoother than standard Bondo, easier to spread/sand, holds up great, and gives pro-level results!
How to Use (Basic Instructions):
- Prepare the surface– Clean thoroughly, abrade/grind to bare metal or sound substrate, and remove any contaminants.
- Mixing– Use the included hardener (typically added to the filler). Follow the standard 2% hardener ratio (about 1 inch of hardener per golf-ball-sized amount of filler – refer to can for exact guidance). Mix thoroughly on a clean mixing board in a figure-8 motion to avoid air bubbles and pinholes.
- Application– Apply with firm pressure using a spreader to fill dents, holes, or imperfections. Build in layers if needed. Non-sag formula works great on vertical/overhead repairs.
- Curing– Allow to cure for 15-20 minutes (depending on temperature – warmer = faster). Do not apply below 5°C/41°F.
- Sanding– Once cured, sand with 80-180 grit for shaping, then finer grits for smooth finish. Use a guide coat to spot highs/lows.
- Finish– Prime and paint as normal.
Important: Always wear appropriate PPE (gloves, respirator, eye protection). Work in a well-ventilated area. Contains styrene – follow all safety guidelines on the label.
Perfect for DIY restorers, weekend warriors, or professional shops looking for reliable, high-quality filler that outperforms the rest. Don\'t settle for ordinary – go GOLD!
Fast shipping from a trusted seller. Questions? Message me! 🚗🔧
Note: California Prop 65 Warning – This product can expose you to chemicals including styrene, known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
