Vickers Support Weapon Prop WW1 WW2 British Tripod 44 Inch Replica 3D Printed For Sale

Full-Size WWI / WWII British Vickers Support Weapon — Non-Firing Prop, With Tripod.Require Heavy Gluing and setup piece by piece.
A 1:1 display and costume prop of the British Vickers, 44 inches from the back of the spade grips to the muzzle and within a tenth of a percent of the real weapon\'s length. It comes complete with its field tripod: the cast yoke, three splayed legs on spade feet, the pintle, and the curved elevating arc with its threaded screw and hand-wheel running up to the back of the body. Set up it stands just under 33 inches tall and a little over two feet across the feet — the silhouette everybody knows from the Western Front and from Burma.
Features:

• A full-size 1:1 WWI and WWII British Vickers support weapon prop on its own three-legged field tripod — 44 inches of gun, standing nearly 33 inches tall
• TOTAL ASSEMBLED SIZE — 44.15 × 25.17 × 32.85 in (1,121.4 × 639.3 × 834.4 mm), across the legs and to the top of the sight. Measured from the model
• NON-FUNCTIONAL DISPLAY AND COSTUME PROP. No firing mechanism, no moving action, nothing chambers or feeds, no projectile capability of any kind — a solid printed piece
• Ships with a blaze-orange muzzle tip permanently printed in, as required for imitation props
• The complete tripod is included — cast yoke, three splayed legs with spade feet, pintle, curved elevating arc, threaded elevating screw and hand-wheel
• The unmistakable long cylindrical jacket over the full length of the barrel, with the stepped muzzle cup at the front
• Twin spade grips, tangent sight and top cover on the rectangular body, and a cross-pin with an L-shaped handle through the trunnion
• Prints in 9 parts that meet on keyed mating faces and locating pegs; glue for permanency (glue not included)
• Ships unpainted in black PLA — the first photo shows a painted example; no ammunition, sling, case or figures are included
• 3D printed to order on our in-house production printers — display-ready as printed,

The gun itself has the long cylindrical jacket over the whole barrel with the stepped muzzle cup at the front, the rectangular body with its top cover and tangent sight, the twin spade grips at the rear, and the L-handled cross-pin through the trunnion that drops it onto the tripod.
This is a prop. It has no firing mechanism, no moving action and no projectile capability of any kind — it is a solid printed display piece, and it ships with a blaze-orange muzzle tip printed permanently into the model.
How it\'s made: 3D printed to order in quality black PLA on our in-house production printers. It arrives in 9 parts — two jacket sections, the body, the pintle and elevating gear, the leg yoke, three legs and the cross-pin — that meet on keyed mating faces and locating pegs and can be glued for permanency (glue not included). The black finish displays well as printed.
Please note: The first image shows a painted example. No ammunition, sling, carrying case, figures or stand are included. Because each is made to order, please allow the stated handling time before shipment.