When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
MEASURE YOUR VISE, BOTH JAWS AND DUST CAP OPENING!
WILTON 4” JAWS BULLET VISE DOMED DUST CAP REPLACEMENT FOR 400, 9400, 8400, 101057 AND OTHERS.
HOW MANY BULLETS ARE OUT THERE THAT HAVE A MISSING CAP OR HAVE THEIR CAP DENTED? WILTON NO LONGER SUPPORTS PARTS FOR THESE BULLETS.
HERE’S THE SOLUTION!
THE REPLACEMENT CAP IS 2” IN DIAMETER WITH A MIRROR FINISH ON THE STAINLESS STEEL.
THESE WILTON VISES ARE CAST STEEL SO THE OPENINGS WILL VARY IN SIZE.
THE BULLET’S STATIC END ON PICTURED VISE IS 1.965” JUST SLIGHTLY SMALLER THEN THE 2” DUST CAP, THEREFORE THE OUTER RIM OF THE CAP MAY NEED TO BE FILED DOWN OR GROUND DOWN SLIGHTLY TO FIT YOUR BULLET. REMEBER THE VISES ARE CASTED STEEL AND EACH WILL VARY SLIGHTLY.
IN SOME CASES THE OPENING IN THE VISE MAY BE SLIGHTLY OVERSIZED, IF THIS IS THE CASE SIMPLY APPLY A THIN COATING OF CLEAR SILICONE ADHESIVE TO BRIDGE THE GAP AND SECURE THE DUST CAP.
ONCE SIZED SIMPLY TAP INTO PLACE WITH A NON-MARRING HAMMER OR TAP IN USING A PIECE OF WOOD. THE DUST CAP CAN BE LEFT WITH ITS SHINY MIRROR FINISH OR PAINTED TO MATCH THE COLOR OF YOUR VISE.
THE DUST CAP REPLACEMENT WILL GIVE THAT FACTORY FINISHED LOOK TO YOUR BULLET VISE AS WELL AS PROTECT THE ACME SCREW ASSEMBLY FROM DEBRIS.
THIS sale IS FOR THE DUST CAP REPLACEMENT, THE VISE PICTURED IS NOT PART OF THE sale AND IS FOR DISPLAY PURPOSES ONLY.
