XtremepowerUS 50130 16" 3200W Concrete Saw Wet/Dry Cutter For Sale

XtremepowerUS 50130 16" Concrete Saw - Description 1 ⚙️ Key features

• 3,200W motor / 20A / 115V – Cuts through concrete, stone, brick, and porcelain.
• 16" diamond blade included – Ready to use; blade guard for safety.
• Wet & dry cutting capability – Built‑in water feed attachment with flow control valve; dust port for dry cuts.
• Double protection switch – Prevents accidental start.
• GFCI built into power cord – Ground fault protection for safer operation.
• Extraction dust port – Keeps cutting line visible by removing debris.

2 📋 Specifications rothNot specified – typical 1" (25.4mm)rothNot specified – approximately 5‑6″ depending on blade BrandXtremepowerUS Model50130 Product typeWet/dry concrete saw (circular saw) Power3,200 W Voltage115 V AC Current rating20 A No‑load speed4,700 RPM Blade diameter16 inches (included) Arbor size Cutting depth (max) Water feedBuilt‑in with flow control valve Dust portYes (for dry cutting) Safety featuresDouble protection switch, GFCI plug, blade guard Weight40 lbs Dimensions (LxWxH)32" x 8.5" x 18.5" ColorBlack 3 🧱 Suitable materials & applications ✅ Ideal for cutting

• Concrete, reinforced concrete, pavers, blocks
• Natural stone (granite, marble, slate)
• Porcelain tile, ceramic tile, bricks
• Asphalt (light cutting)

🏗️ Typical uses

• Construction sites, road work, building renovation
• Cutting expansion joints, trenches, openings
• Masonry and tile installation
• Demolition and remodeling

⚠️ Important: Always use water for wet cuts (concrete, stone) to reduce dust and extend blade life. For dry cuts (brick, tile), connect a vacuum to the dust port. Wear hearing protection, eye protection, and a respirator. 4 📦 What's in the box XtremepowerUS 50130 concrete saw (main unit) 16" diamond blade (installed or separate) Water feed hose attachment (if applicable) Wrench for blade changes User manual *Water source and vacuum not included. GFCI plug attached. 5 🛡️ Warranty & support ✅ Manufacturer warranty (XtremepowerUS – see policy for details)
✅ 30‑day buyer protection – returns accepted for defects
✅ Seller support: message us for missing parts, operation questions, or warranty claims
✅ Replacement blades and parts available online 6 🚚 Shipping & operation/safety guide 📦 Shipping details
• Ships from USA within 1 business day
• Free ground shipping (continental US)
• Tracking provided after dispatch
• Returns accepted within 30 days – buyer pays return unless defective 💧 Wet/dry cutting & GFCI operation (replaces generic maintenance)
• Before first use: Check that the blade is securely mounted and the guard moves freely. Ensure the GFCI plug is not damaged. Connect to a grounded 115V 20A outlet.
• Wet cutting setup: Attach a garden hose to the water inlet (if equipped). Open the water control valve to a slow trickle before starting the saw. Adjust water flow so there is enough to suppress dust but not flood the work area. Never run the saw without water when cutting concrete – blade life will be drastically reduced.
• Dry cutting setup: For dry applications (brick, tile), connect a shop vac to the dust extraction port. Wear a dust mask. The saw can be used dry, but expect more dust.
• Starting the saw: The double protection switch requires two actions to start (e.g., press a safety button and squeeze the trigger). Release both to stop.
• GFCI testing: Press the “TEST” button on the GFCI plug; the saw should stop. Press “RESET” to restore power. Do this before each use.
• Cutting technique: Let the saw reach full speed before contacting the material. Do not force the blade – allow the weight of the saw to do the work. For deep cuts, make multiple passes with increasing depth.
• Blade inspection: Before each use, check the diamond blade for cracks, missing segments, or uneven wear. Replace if damaged. The blade arbor must match the saw’s shaft (typically 1").
• Cleaning the saw: After use, disconnect power. Remove the blade and clean water residue from the shaft and guard. Wipe the exterior with a dry cloth. Do not hose down the motor.
• Storage: Store the saw in a dry place. Wrap the cord loosely. Keep the blade guard in place. If wet cutting was performed, allow the saw to dry before storage to prevent rust. 📌 Seller note – This is the XtremepowerUS 50130 16" concrete saw (3,200W, 20A). Includes blade, wet/dry capability, and GFCI plug. Designed for cutting concrete, stone, brick, and tile. Message us for a digital manual or blade replacement advice.